• Updates

> Updates > News



Newly Launched YL9100 Plus HPLC

Newly improved YL9110 Plus Quaternary Pump delivers the enhanced mixing performance to provide the very stabilized baseline by reducing noise when it comes to change the solvent composition. With automatic compressibility compensation minimizing flow rate deviation in the pump, YL9100 Plus HPLC ensures superior RT repeatability by providing accurate and precise flow rates.

  • 검량성-1.bmp
  • Step_Gradient_website.png
· YL911x Plus Pump

A powerful LCD control pad added to YL911x Plus Pumps provides easy-to-get ready status with a finger tab and monitors a pump without a software. YL9110 Plus Quaternary Pump enables delivery of the superior repeatability with the more stabilized baseline when it’s in the gradient condition.

- Smart Control
Setting any factors or pressing ‘Purge’ button, you can easily set the flow rate or solvent composition. Also, you can monitor the pressure and status of pumps.

- Fully Automatic Prime
You only need to set the solvent composition and press ‘Prime On’. It’ll automatically flow each solvent at 100% to remove bubbles or change the solvent in the flow path and then get back to the set composition rate to be ready.

· YL9150 Plus LC Autosampler

Newly launched YL9150 Plus LC Autosampler developed by our own technology can provide the enhanced efficiency of analysis with fast injection and enlarged sample capacity. The spray-type rinsing reduces the carry-over by washing off the contamination and the direct injection leads the low sample consumption. The leak sensor and the automatic tray sensor ensure the process safety as well as the LED inside of equipment allows users to see its operation.

• Sample Capacity : Up to 120 samples (2 ml vial), 80 samples (4 ml vial)
• Carry Over : < 0.04% with standard wash
Typically < 0.02% with extra wash
• Reproducibility : RSD < 0.3% for full loop injections
RSD < 0.5% for partial loopfill injections (Injection volume > 5 μL)
RSD < 1.0% for μl pick-up injections (Injection volume > 5 μL)
• Injection Volume : 1 μL - 400 μL, with 0.1 μL increment
• Sample Cooling : 4 °C ~ 40 °C (option)